Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Network Performance Monitor (NPM) > Network Performance Monitor Getting Started Guide > Custom alerts and reports > How thresholds work in SolarWinds NPM

How thresholds work in SolarWinds NPM

Table of contents
No headers
Created by Chris.Moyer, last modified by Chris.Moyer on Oct 03, 2016

Views: 62 Votes: 0 Revisions: 7

Alerts are triggered when a monitored value exceeds a threshold. Orion comes with predefined static thresholds for most statistics, but you can override these thresholds and customize them on a per-object basis.

Orion provides two threshold levels: critical and warning. A value that crosses a warning threshold appears yellow, and a critical threshold appears red.

If you want to change the predefined value for a threshold, you use a static threshold or a dynamic baseline threshold.

  • Static threshold. a constant value that you set for your threshold. For example, the warning threshold for response time might be 500 ms, and the critical value might be 1000 ms. You should be familiar with the performance of that object to know what a reasonable value for a static threshold is.
  • Dynamic baseline threshold. data for a statistic are collected for a week, and then used to calculate mean and standard deviation. The warning and critical threshold values are defined as 2 and 3 standard deviations above the mean, respectively. For example, if the mean value for packet loss for a specific node is 0%, the warning threshold for packet loss would be 3% (+2 standard deviations) and the critical threshold would be 4% (+3 standard deviations). Dynamic baseline thresholds are the most accurate way to define thresholds for a specific device.

Baselines are calculated once, after data has been collected for a week. You can recalculate baselines on demand.

Last modified
15:43, 3 Oct 2016

Tags

Classifications

Public