Submit a ticketCall us

AnnouncementsChange Is Inevitable

Get valuable help when it comes to tracking and monitoring changes. SolarWinds® Server Configuration Monitor (SCM) is designed to help you: detect, track, and receive alerts when changes occur, correlate system performance against configuration changes, compare server and application configuration against custom baselines, and verify application and system changes.

Learn more.

Home > Success Center > Network Performance Monitor (NPM) > NPM Documentation > NPM 12.3 Administrator Guide > Monitor custom statistics based on MIBs and OIDs with Universal Device Pollers > Select nodes or interfaces to poll a custom statistic

Select nodes or interfaces to poll a custom statistic

Table of contents
No headers
Created by Caroline Juszczak, last modified by Magdalena.Markova on Nov 08, 2016

Views: 729 Votes: 0 Revisions: 4

When you have created a UnDP poller, specify the devices (nodes or interfaces) to monitor the statistic.

Before you begin, make sure the UnDP poller is created and enabled. See Define a custom statistic to monitor.

  1. Click SolarWinds Orion > Network Performance Monitor and start the Universal Device Poller.
  2. Click Assign Pollers.
  3. Navigate the poller tree, select thdee pollers you want to assign, and click Next.

    By default, there are two poller groups:

    • Example - all predefined out-of-the box UnDP pollers.
    • Default Group - all user-defined UnDPs if they are not assigned to any other group.

    Selecting a poller group selects all pollers in the group. If you do not want to assign all pollers, clear the pollers that you do not want to assign.

  4. Expand the node tree down to the interface level, and select the elements to apply the pollers.
    • Interfaces are not displayed unless you are assigning an interface poller.
    • Selecting a node automatically assigns a selected interface poller to all interfaces on the node. Clear boxes for interfaces that should not be assigned to the poller.
  5. Click Test to see current results of the selected pollers on the selected nodes or interfaces. If the test fails, see Troubleshooting failed tests.
  6. After you have completed your poller assignments, click Finish.
Last modified