Submit a ticketCall us

Get a crash course on Network Monitoring delivered right to your inbox
This free 7-day email course provides a primer to the philosophy, theory, and fundamental concepts involved in IT monitoring. Lessons will explain not only how to perform various monitoring tasks, but why and when you should use them. Sign up now.

Home > Success Center > Network Performance Monitor (NPM) > NPM 12.1 Administrator Guide > Troubleshoot Unknown nodes

Troubleshoot Unknown nodes

Created by Magdalena.Markova, last modified by Magdalena.Markova on Dec 20, 2016

Views: 206 Votes: 1 Revisions: 3

This article provides information about the device status in NPM, how it is polled, and what you can do if your nodes or interfaces have the Unknown status in NPM.

Device status

By default, node status in NPM is detected using ICMP. NPM sends a ping request and if the response is not returned, NPM places the node into the Warning state and fast-polls the device for 120 seconds. If the node still does not respond, NPM notifies you that the node is Down.

ICMP only tells you that NPM did not receive a response for the ping request. The device could be down, but there might also be a routing problem, an intermediary device could be down, or something could have blocked the packet on its way to or from the device. See Get more details about the node in the NPM Getting Started Guide for more details.

Status of sub-elements, such as interfaces and volumes, is detected using SNMP. This is more accurate, because the device tells you that the sub-element is Down.

Unknown status

Unknown status tells you that the node cannot be polled for response time and status.

When you add a node to the Orion Platform or remanage a node, its status is Unknown until the data is polled. By default, the interval for polling status is two minutes.

If a node stays in the Unknown status longer than the polling interval, perform the following:

Verify that the status and response time are polled through ICMP

Always use ICMP to poll status and response time when possible. Poll status and response time using SNMP only when ICMP is disabled and SNMP is enabled on the device.

  1. On the node details view, click List Resources in the Management resource.
  2. In the Status & Response Time option, verify the option. If SNMP is selected, click ICMP (ping), and click Submit. You return to the Node Details view.

    npmag_listresources.png

After two minutes, the node status is Up.

Verify the polling method for the node

  1. On the node details view for the node, click Edit Node in the Management resource.
  2. In the Polling Method area, select Most Devices: SNMP and ICMP and provide version, port, and credentials.

    npmag_editnode.png

  3. Click Submit.

After two minutes, the node status is Up. After ten minutes, node statistics are updated.

Verify that the status poller is enabled

  1. Log in to the Orion Web Console using an Administrator account.
  2. Click Settings > All Settings > Manage Pollers.
  3. In the Local Poller Library tab, click SolarWinds Native Poller, and locate the Status & Response Time ICMP poller.

    npmag_troubleshootunknown_managenodes.png

  4. Click the item in the Assignments column for the poller. A list of nodes where the poller is enabled opens.
  5. Search for your node and ensure that the Poller Status is ON.

    npmag_troubleshootunknown_assignpoller.png

  6. If the poller status is OFF, select the node, and click Enable Poller.

After two minutes, the node status is Up.

Unknown interfaces

For interfaces, Unknown status might be caused by the following reasons:

  • NPM repeatedly did not get results from a status poll.
  • Unknown status was polled on the interface.
  • The interface details changed on the device and NPM is not able to map the interfaces correctly.

    In this case, the interface index for the interfaces in the database has the value -1.

To troubleshoot the issue when NPM is not able to map an interface correctly, re-add the interfaces:

When you re-add an interface, you lose all historical data for the interface.

  1. Log in to the Orion Web Console using an Administrator account.
  2. Click Settings > Manage Nodes.
  3. Expand the node, select the interface, and click Delete.
  4. Select the node, and click List Resources.
  5. On List Resources, select the interface, and submit your changes.

The interface is re-added with updated details, the interface status reflects the polled status.

Data not populating from the device even though the node is Up

If the node is Up and you cannot find data in the Orion Web Console, try the following troubleshooting options:

  • Wait ten minutes after you add a device for the Orion Platform to complete the polling cycle, and then refresh your screen.
  • Verify that the device was not in maintenance (unmanaged state) during the requested time period. Click Settings > Manage Nodes, and review the Status for the device.
  • Verify that interfaces or volumes are monitored correctly. In Node Management, select the node, and click List resources and confirm the interfaces or volumes are selected.
  • Verify that hardware health sensors on the device provide both status and values. If they provide only status, the Orion Platform does not have data to display in charts.

 

 
Last modified
08:21, 20 Dec 2016

Tags

Classifications

Public