Submit a ticketCall us

ebook60.pngHow to be a Cisco® ASA ace

Our eBook, Thou Shalt Not Pass…I Think?! can help you overcome the challenges of monitoring and managing Cisco ASA firewalls. This eBook is a great read if you’ve been frustrated with monitoring firewalls, managing ACL configs, and troubleshooting VPN connections.

Get your free eBook.

Home > Success Center > Network Performance Monitor (NPM) > NPM 12.2 Administrator Guide > Monitor custom statistics based on MIBs and OIDs with Universal Device Pollers > View Universal Device Poller statistics in the Orion Web Console

View Universal Device Poller statistics in the Orion Web Console

Created by Caroline Juszczak, last modified by Magdalena.Markova on Nov 09, 2016

Views: 600 Votes: 0 Revisions: 4

If you want to see a poller results in the Orion Web Console, you need to define which resources should be displayed on which views.


The poller must be enabled, and assigned to the devices.

Set the poller to collect historical statistics. Without historical data, Orion Web Console resources will only display the last polled value, and you cannot add charts with the poller results to the Orion Web Console.

Define resources with UnDP results for Orion Web Console views

Click Preview to see what the poller resource will look like in the Orion Web Console view.

  1. Click SolarWinds Orion > Network Performance Monitor and start the Universal Device Poller.
  2. In the All Defined Pollers pane, select the poller whose results you want to add as a Orion Web Console resource.
  3. Right-click the poller, and click Web Display.
  4. Confirm that Yes is selected, and select the types of poller resources that you want to display on individual Orion Web Console views.
  5. Make sure Do Not Show This Poller If It Is Not Assigned is selected. It ensures that the custom poller resource appears only on views for nodes or interfaces that have the custom poller assigned to them and enabled.
  6. Click Finish.

When you log in to the Orion Web Console, the selected resources with poller data will appear on selected views for nodes or interfaces that have the poller assigned to them and enabled.

See also View UnDP status on maps.

Last modified