Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Network Performance Monitor (NPM) > NPM 12.2 Administrator Guide > Monitor custom statistics based on MIBs and OIDs with Universal Device Pollers > Define UnDP Warning and Critical thresholds

Define UnDP Warning and Critical thresholds

Table of contents
No headers
Created by Caroline Juszczak, last modified by Magdalena.Markova on Nov 09, 2016

Views: 30 Votes: 0 Revisions: 5

If values polled by UnDPs on a device reach a certain level (critical or warning threshold), the UnDP on the device is highlighted in the Orion Web Console.

To get notified about exceeding a threshold in an email, configure an alert.
To see pollers with exceeded thresholds in a map, see View UnDP status on maps.

  1. Log in to the Orion Web Console as an administrator.
  2. Click Settings > All Settings in the menu bar.
  3. In the Thresholds & Polling grouping, click Custom Poller Thresholds.
  4. Select a poller.
  5. Select whether the expected polled value is a Text or a Number.

    The Poller Value Type determines how the polled value will be interpreted. It also influences the set of possible comparison functions.

    • For the Number type, available values include is greater than or less than.
    • For the Text type, available values include for example contains.
  6. Build conditions to define both Warning and Critical Thresholds:
    1. Select whether All Child Conditions Must Be Satisfied (AND) or if only At Least One Child Condition Must Be Satisfied (OR).
    2. Select a comparison relation, and provide a threshold value on which the comparison is based.


    3. Click + to add additional conditions, as required, to define the poller threshold.
  7. After configuring all thresholds, click Submit.

If a value reported by the device belongs to the range defined by the Warning Threshold, pollers in maps will be yellow.

If a value reported by the device belongs to the range defined by the Critical Threshold, pollers in maps will be red.

Last modified
03:00, 9 Nov 2016