Submit a ticketCall us

Get a crash course on Network Monitoring delivered right to your inbox
This free 7-day email course provides a primer to the philosophy, theory, and fundamental concepts involved in IT monitoring. Lessons will explain not only how to perform various monitoring tasks, but why and when you should use them. Sign up now.

Home > Success Center > Network Performance Monitor (NPM) > Create a custom report to select 10-gigabit interface statistics

Create a custom report to select 10-gigabit interface statistics

Table of contents

Updated June 19, 2017

Overview

This article describes how to create a custom report to display 10-gigabit interface traffic statistics.

Environment

NPM 12.0 and later

Steps

  1. Log in to the Orion Web Console.
  2. Click Settings > All settings > Manage Reports.
  3. Click Create new report and select the "Custom Table" resource name.
  4. Click Select and continue.
  5. In the Report field, select interface from the drop-down list and accept the other default settings.
  6. In the Conditions/Logic section, specify the device type. For example, when selecting Cisco ASR 9001 and so on, add more devices if you need to include multiple devices by clicking + and adding a simple condition.
  7. After adding all the devices, click + to add an "AND/OR" block.
  8. Verify that the "AND" condition is selected and click Add Layout. The completed logic area should look similar to the following:
  9. Specify the table name(optional) and complete the wizard.

 

 

 

Last modified
23:06, 18 Jun 2017

Tags

Classifications

Public