Submit a ticketCall us

Putting Your Logs Where They Belong with the New SolarWinds Log Manager for Orion

The new SolarWinds® Log Manager for Orion® finally puts your log data right where it belongs, in the heart of your Orion console. Gain insight into the performance of your infrastructure by monitoring your logs in a unified console allowing you to see a wealth of information about the health and performance of your network and servers.

Reserve a Seat for Wednesday May 23rd 11am CDT | Reserve a Seat for Tuesday May 22nd 10:30am GMT | Reserve a Seat for Tuesday May 22nd 1pm SGT / 3pm AEST

Home > Success Center > Network Configuration Manager (NCM) > NCM template: Brocade 8510 and 7840 fiber-channel switches (

NCM template: Brocade 8510 and 7840 fiber-channel switches (

Table of contents

Updated March 13, 2017


This article provides a device template to be used with NCM.


  • All NCM versions
  • Device: Brocade 8510 and 7840 fiber-channel switches


Depending on the version of NCM you are using, follow the relevant steps to add a template. For instructions, refer to the NCM Administrator Guide.

Use the following lines as the actual content of the template:

<!--SolarWinds Network Management Tools-->
<!--Copyright 1999-2008 SolarWinds.Net All rights reserved-->
<Configuration-Management Device="Brocade Switches" SystemOID="">
<Command Name="RESET" Value=""/>
<Command Name="EnterConfigMode" Value="configure"/>
<Command Name="ExitConfigMode" Value="exit"/>
<Command Name="Startup" Value=""/>
<Command Name="Running" Value="configshow"/>

<Command Name="DownloadConfig" Value="configshow"/>
<Command Name="DownloadConfigIndirectSCP" Value="configupload -p scp "${SCPStorageAddress}","${SCPServerUserName}","${StorageFilename}"${CRLF}${SCPServerPassword}"/>
<Command Name="UploadConfigIndirectSCP" Value="configdownload -p scp "${SCPStorageAddress}","${SCPServerUserName}","${StorageFilename}"${CRLF}${SCPServerPassword}"/>
<Command Name="Version" Value="show version"/>

<Command Name="DownloadConfigIndirect" Value="transfer upload mode tftp${CRLF} transfer upload datatype config${CRLF} transfer upload filename ${StorageFilename}${CRLF} transfer upload serverip ${StorageAddress}${CRLF} transfer upload start${CRLF}y"/>
<Command Name="More" Value=" or "/>



Note: To copy content without line numbers, hover over the text and click the view source button (View Source). This opens a new window where you can select and copy text without any formatting or line numbering.


Last modified