Submit a ticketCall us

ebook60.pngHow to be a Cisco® ASA ace

Our eBook, Thou Shalt Not Pass…I Think?! can help you overcome the challenges of monitoring and managing Cisco ASA firewalls. This eBook is a great read if you’ve been frustrated with monitoring firewalls, managing ACL configs, and troubleshooting VPN connections.

Get your free eBook.

Home > Success Center > Network Configuration Manager (NCM) > NCM template - HP 5900 - 1.3.6.1.4.1.25506.1.334

NCM template - HP 5900 - 1.3.6.1.4.1.25506.1.334

Table of contents

Updated February 24, 2017

Overview

This article provides a device template to be used with NCM for HP 5900.

Environment

  • All NCM versions
  • Device: HP A5500 (1.3.6.1.4.1.25506.1.334)

Steps

  1. Depending on the version of NCM you are using, follow the relevant steps to add a template. For instructions, refer to the NCM Administrator Guide.
  2. Use the following lines as the actual content of the template:
    <Configuration-Management Device="HP5500" SystemOID="1.3.6.1.4.1.25506.1.334">
      <Commands>
        <Command Name="RESET" Value="screen-length disable" />
        <Command Name="REBOOT" Value="reload${CRLF}y${CRLF}y" />
        <Command Name="EnterConfigMode" Value="system-view" />
        <Command Name="ExitConfigMode" Value="return" />
        <Command Name="Startup" Value="saved-configuration" />
        <Command Name="Running" Value="current-configuration" />
        <Command Name="EraseConfig" Value="write erase${CRLF}Y" />
        <Command Name="SaveConfig" Value="save${CRLF}y${CRLF}${CRLF}y${CRLF}" />
        <Command Name="VERSION" Value="display version" />
        <Command Name="DownloadConfig" Value="display ${ConfigType}"/>
        <Command Name="UploadConfig" Value="${EnterConfigMode}${CRLF}${ConfigText}${CRLF}${ExitConfigMode}" />
        <Command Name="DOWNLOADCONFIGINDIRECT" Value="tftp ${StorageAddress} put config.cfg ${StorageFilename}" />
      </Commands>
    </Configuration-Management>
    


    Note: To copy content without line numbers, hover over the text and click the view source button (View Source). This opens a new window where you can select and copy text without any formatting or line numbering.

 

 

 

Last modified

Tags

Classifications

Public