Submit a ticketCall us

Training Class Getting Started with SolarWinds Backup - February 28

This course offers customers an introduction to SolarWinds Backup, focusing on configuring the backup technology, taking backups, data restoration and data security. It is a great primer and will get you up to speed quickly on SolarWinds Backup.
Register for class.

Home > Success Center > Network Configuration Manager (NCM) > NCM Template - Cisco MDS 9124 (1.3.6.1.4.1.9.12.3.1.3.587)

NCM Template - Cisco MDS 9124 (1.3.6.1.4.1.9.12.3.1.3.587)

Table of contents
Created by John Salvani, last modified by MindTouch on Jun 23, 2016

Views: 1,245 Votes: 2 Revisions: 9

Overview

This article provides a device template to be used with NCM.

Environment

  • Device: Cisco MDS 9124 (1.3.6.1.4.1.9.12.3.1.3.587)
  • All NCM versions

Detail

  1. Depending on the version of NCM you are using, follow the relevant steps to add a template. For instructions, refer to the NCM Administrator Guide.
  2. Use the following lines as the actual content of the template:
    <Configuration-Management Device="Cisco MDS 9124" SystemOID="1.3.6.1.4.1.9.12.3.1.3.587">
      <Commands>
        <Command Name="RESET" Value="terminal width 0${CRLF}terminal length 0"/>
        <Command Name="Reboot" Value="reload${CRLF}y${CRLF}y"/>
        <Command Name="EnterConfigMode" Value="config terminal"/>
        <Command Name="ExitConfigMode" Value="end"/>
        <Command Name="Startup" Value="startup"/>
        <Command Name="Running" Value="running"/>
        <Command Name="DownloadConfig" Value="Show ${ConfigType}"/>
        <Command Name="UploadConfig" Value="${EnterConfigMode}${CRLF}${ConfigText}${CRLF}${ExitConfigMode}"/>
        <Command Name="DownloadConfigIndirect" Value="copy ${ConfigType} ${TransferProtocol}://${StorageAddress}/${StorageFilename}${CRLF}${CRLF}${CRLF}"/>
        <Command Name="UploadConfigIndirect" Value="copy ${TransferProtocol}://${StorageAddress}/${StorageFilename}  ${ConfigType}${CRLF}${CRLF}"/>
        <Command Name="DownloadConfigIndirectSCP" Value="copy ${ConfigType} ${TransferProtocol}://${SCPServerUserName}@${SCPStorageAddress}/${StorageFilename}${CRLF}${CRLF}${CRLF}${CRLF}${SCPServerPassword}"/>
        <Command Name="UploadConfigIndirectSCP" Value="copy ${TransferProtocol}://${SCPServerUserName}@${SCPStorageAddress}/${StorageFilename}  ${ConfigType}${CRLF}${CRLF}${SCPServerPassword}"/>
        <Command Name="EraseConfig" Value="write erase${CRLF}Y"/>
        <Command Name="SaveConfig" Value="write memory"/>
        <Command Name="Version" Value="show version"/>
      </Commands>
    </Configuration-Management>
    

    Note: To copy content without line numbers, hover over the text and click the view source button (View Source). This opens a new window where you can select and copy text without any formatting or line numbering.

     

 

 

 

 

Last modified

Tags

Classifications

Public