Submit a ticketCall us

AnnouncementsCome see SolarWinds at VMUG Frankfurt

SolarWinds is delighted to attend the upcoming VMUG which will take place at Kap Europa in Frankfurt on June 19th, 2018.

See event details.

Home > Success Center > Network Configuration Manager (NCM) > NCM Template - Cisco 5010 NX-OS (1.3.6.1.4.1.9.12.3.1.3.798)

NCM Template - Cisco 5010 NX-OS (1.3.6.1.4.1.9.12.3.1.3.798)

Table of contents
Created by John Salvani, last modified by Mariusz Handke on Jul 01, 2016

Views: 864 Votes: 0 Revisions: 5

Overview

This article provides a device template to be used with NCM.

Environment

  • Device: Cisco 5010 NX-OS VRF Management Devices (1.3.6.1.4.1.9.12.3.1.3.798)
  • All versions of NCM 

Steps

  1. Depending on the version of NCM you are using, follow the relevant steps to add a template. For instructions, refer to the NCM Administrator Guide.
  2. Use the following lines as the actual content of the template:
     
    <Configuration-Management Device="Cisco 5010 NX-OS VRF Management Devices" SystemOID="1.3.6.1.4.1.9.12.3.1.3.798">
    <Commands>
    <Command Name="RESET" Value="terminal width 0${CRLF}terminal length 0"/>
    <Command Name="Reboot" Value="reload${CRLF}y${CRLF}y"/>
    <Command Name="EnterConfigMode" Value="config terminal"/>
    <Command Name="ExitConfigMode" Value="end"/>
    <Command Name="Startup" Value="startup-config"/>
    <Command Name="Running" Value="running-config"/>
    <Command Name="DownloadConfig" Value="show ${ConfigType}"/>
    <Command Name="UploadConfig" Value="${EnterConfigMode}${CRLF}${ConfigText}${CRLF}${ExitConfigMode}"/>
    <Command Name="DownloadConfigIndirect" Value="copy ${ConfigType} ${TransferProtocol}://${StorageAddress}/${StorageFilename} vrf management${CRLF}${CRLF}${CRLF}"/>
    <Command Name="UploadConfigIndirect" Value="copy ${TransferProtocol}://${StorageAddress}/${StorageFilename} ${ConfigType}${CRLF}${CRLF}"/>
    <Command Name="DownloadConfigIndirectSCP" Value="copy ${ConfigType} ${TransferProtocol}://${SCPServerUserName}@${SCPStorageAddress}/${StorageFilename}${CRLF}${CRLF}${CRLF}${CRLF}${SCPServerPassword}"/>
    <Command Name="UploadConfigIndirectSCP" Value="copy ${TransferProtocol}://${SCPServerUserName}@${SCPStorageAddress}/${StorageFilename} ${ConfigType}${CRLF}${CRLF}${SCPServerPassword}"/>
    <Command Name="EraseConfig" Value="write erase${CRLF}Y"/>
    <Command Name="SaveConfig" Value="copy running startup"/>
    <Command Name="Version" Value="show version"/>
    </Commands>
    </Configuration-ManageSyntament>

    Note: To copy content without line numbers, hover over the text and click the view source button (View Source). This opens a new window where you can select and copy text without any formatting or line numbering.

     

Last modified

Tags

Classifications

Public