Submit a ticketCall us

whitepaperYour VM Perplexities Called, and They Need You to Read This.

Virtualization can give you enormous flexibility with future workloads and can be a key enabler for other areas, like cloud computing and disaster recovery. So, how can you get a handle on the performance challenges in your virtual environment and manage deployments without erasing the potential upside? Learn the four key areas you need to be focusing on to help deliver a healthy and well-performing data center.

Get your free white paper.

Home > Success Center > Network Configuration Manager (NCM) > NCM Documentation > NCM 7.9 Administrator Guide > Change the minimum config size and number of simultaneous downloads > Upload configuration changes

Upload configuration changes

Created by Caroline Juszczak, last modified by Anthony.Rinaldi_ret on Oct 03, 2016

Views: 567 Votes: 0 Revisions: 4

For a multi-node upload or download operation, the Simultaneous Downloads/Uploads setting can be used as a throttle. By default it is set to run 25 Sessions simultaneously. To change this setting, see Configuration files.

For IPv6, you can rediscover devices that were previously discovered with the engine using IPv4, and you can do inventories for devices already discovered with IPv4 or rediscovered with IPv6. Otherwise, new IPv6 addresses can be added to SolarWinds NCM, though IPv6 addresses cannot be communicated with through SNMP. You can execute scripts, upload, and download configuration files on IPv6 addresses, and Telnet and SSH communication is supported.

You can upload changes to a custom config type only to a single device, but through an indirect transfer protocol, such as Telnet or TFTP. As a result, the Write Config to NVRAM After Upload option is disabled.

Upload an entire configuration

  1. Click My Dashboards > Network Configuration > Configuration Management.
  2. Select one or more nodes.
  3. Click Upload.
  4. Select a config, and edit it if necessary.
  5. Click Advanced at the bottom.
  6. Select one or more advanced options, and then click Upload.


Last modified