Submit a ticketCall us

Putting Your Logs Where They Belong with the New SolarWinds Log Manager for Orion

The new SolarWinds® Log Manager for Orion® finally puts your log data right where it belongs, in the heart of your Orion console. Gain insight into the performance of your infrastructure by monitoring your logs in a unified console allowing you to see a wealth of information about the health and performance of your network and servers.

Reserve a Seat for Wednesday May 23rd 11am CDT | Reserve a Seat for Tuesday May 22nd 10:30am GMT | Reserve a Seat for Tuesday May 22nd 1pm SGT / 3pm AEST

Home > Success Center > Network Configuration Manager (NCM) > NCM 7.7 Administrator Guide > Get started > Enable SSL communication with SolarWinds NCM

Enable SSL communication with SolarWinds NCM

Table of contents
No headers
Created by Caroline Juszczak, last modified by Anthony.Rinaldi_ret on Oct 03, 2016

Views: 530 Votes: 0 Revisions: 4

SolarWinds NCM supports the use of Secure Sockets Layer certificates to enable secure communications with the Orion Web Console. Secure SSL communications are conducted over port 443.

An SSL certificate must be installed on your SolarWinds NCM server.

  1. Log in as an administrator to your main SolarWinds NCM server.
  2. Start Administrative Tools > Computer Management in the Windows Control Panel.
  3. Expand Services and Applications > Internet Information Services (IIS) Manager > Web Sites.
  4. Right-click SolarWinds NetPerfMon, and click Properties.
  5. Click the Web Site tab.
  6. Confirm that SSL port is set to 443, and click Apply.
  7. Click Advanced.
  8. If the Multiple SSL Identities for This Web Site field does not list the IP address for the Orion Web Console with SSL port 443, complete the following steps:
    1. Click Add, and select the IP address of the Orion Web Console.

      As it was set initially in the Configuration Wizard, this option is usually set to (All Unassigned). If the IP address of the Orion Web Console was not initially set to (All Unassigned), select the actual, configured IP address of the Orion Web Console.

    1. Type 443 as the TCP port, and click OK.
  9. Click the Directory Security tab.
  10. Click Edit in the Secure communications section.
  11. Select Require Secure Channel (SSL), and click OK.
  12. Click Apply, and click OK to exit.

 

Last modified

Tags

Classifications

Public