Submit a ticketCall us

WebinarVisual Monitoring Tactics: Getting More Log Search Value from SolarWinds Log & Event Manager with nDepth Webcast

Do things seem to make more sense when they are visualized? Are you an IT professional or security expert with a wish for more cybersecurity tools that provide an intuitive visual experience? Join Alexis Horn and Jamie Hynds from SolarWinds as they demonstrate how the nDepth feature in LEM can help make visualizing log search results a reality.

Register now.

Home > Success Center > Network Configuration Manager (NCM) > NCM - Knowledgebase Articles > NCM template: Brocade 8510 and 7840 fiber-channel switches (

NCM template: Brocade 8510 and 7840 fiber-channel switches (

Table of contents

Updated March 13, 2017


This article provides a device template to be used with NCM.


  • All NCM versions
  • Device: Brocade 8510 and 7840 fiber-channel switches


Depending on the version of NCM you are using, follow the relevant steps to add a template. For instructions, refer to the NCM Administrator Guide.

Use the following lines as the actual content of the template:

<!--SolarWinds Network Management Tools-->
<!--Copyright 1999-2008 SolarWinds.Net All rights reserved-->
<Configuration-Management Device="Brocade Switches" SystemOID="">
<Command Name="RESET" Value=""/>
<Command Name="EnterConfigMode" Value="configure"/>
<Command Name="ExitConfigMode" Value="exit"/>
<Command Name="Startup" Value=""/>
<Command Name="Running" Value="configshow"/>

<Command Name="DownloadConfig" Value="configshow"/>
<Command Name="DownloadConfigIndirectSCP" Value="configupload -p scp "${SCPStorageAddress}","${SCPServerUserName}","${StorageFilename}"${CRLF}${SCPServerPassword}"/>
<Command Name="UploadConfigIndirectSCP" Value="configdownload -p scp "${SCPStorageAddress}","${SCPServerUserName}","${StorageFilename}"${CRLF}${SCPServerPassword}"/>
<Command Name="Version" Value="show version"/>

<Command Name="DownloadConfigIndirect" Value="transfer upload mode tftp${CRLF} transfer upload datatype config${CRLF} transfer upload filename ${StorageFilename}${CRLF} transfer upload serverip ${StorageAddress}${CRLF} transfer upload start${CRLF}y"/>
<Command Name="More" Value=" or "/>



Note: To copy content without line numbers, hover over the text and click the view source button (View Source). This opens a new window where you can select and copy text without any formatting or line numbering.


Last modified