Submit a ticketCall us
Home > Success Center > Network Configuration Manager (NCM) > NCM - Knowledgebase Articles > NCM Template - Juniper EX4200 (1.3.6.1.4.1.2636.1.1.1.2.31)

NCM Template - Juniper EX4200 (1.3.6.1.4.1.2636.1.1.1.2.31)

Table of contents
Created by John Salvani, last modified by Tara Duval on Oct 09, 2018

Views: 1,578 Votes: 3 Revisions: 10

Overview

This article provides a NCM Device Command Template to be used with Juniper EX4200 (1.3.6.1.4.1.2636.1.1.1.2.31) devices.

Environment

  • NCM 7.3 and later
  • Device: Juniper EX4200 (1.3.6.1.4.1.2636.1.1.1.2.31)

Steps

Depending on the version of NCM you are using, follow the relevant steps to add a template. For instructions, refer to the NCM Administrator Guide.

 

Use following lines as the actual content of the template:

<Configuration-Management Device="Juniper 4200_2" SystemOID="1.3.6.1.4.1.2636.1.1.1.2.31">
  <Commands>
    <Command Name="ALLOCATEPTY" Value="True" />
    <Command Name="CUSTOMUSERNAMEPROMPT" Value="login: " />
    <Command Name="ENABLECOMMAND" Value="configure" />
    <Command Name="MENUBASED" Value="False" />
    <Command Name="VIRTUALPROMPT" Value="&gt;" />
    <Command Name="MORE" Value="---(more" />
    <Command Name="DOWNLOADCONFIG" Value="show configuration | display set" />
  </Commands>
</Configuration-Management> 

 

If the issue still does occur, try the below device template:

<!--SolarWinds Network Management Tools-->
<!--Copyright 2007 SolarWinds.Net All rights reserved-->
<Configuration-Management Device="Juniper 4200 Switches" SystemOID="1.3.6.1.4.1.2636.1.1.1.2.31">
    <Commands>
        <Command Name="RESET" Value=""/>
        <Command Name="EnterConfigMode" Value=""/>
        <Command Name="ExitConfigMode" Value="exit${CRLF}"/>
        <Command Name="MenuBased" Value="false"/>
        <Command Name="VirtualPrompt" Value="%"/>
        <Command Name="EnterCLI" Value="cli${CRLF}configure${CRLF}"/>
        <Command Name="Startup" Value="| display set"/>
        <Command Name="Running" Value="| display set"/>
        <Command Name="DownloadConfig" Value="show ${ConfigType}${CRLF}"/>
        <Command Name="UploadConfig" Value="${ConfigText}${CRLF}$"/>
        <Command Name="DownloadConfigIndirect" Value="copy ${ConfigType} ${TransferProtocol}://${StorageAddress}/${StorageFilename}${CRLF}"/>
        <Command Name="UploadConfigIndirect" Value="copy ${TransferProtocol}://${StorageAddress}/${StorageFilename}  ${ConfigType}${CRLF}"/>
        <Command Name="EraseConfig" Value="write erase${CRLF}Yes"/>
        <Command Name="SaveConfig" Value="save ${CRLF}"/>
        <Command Name="Version" Value=" show system software | match boot"/>
    </Commands>
</Configuration-Management>
Last modified

Tags

Classifications

Public