Submit a ticketCall us

AnnouncementsTHWACKcamp 2018 is here

2018 is the seventh year for THWACKcamp™, and once again we’ll be live October 17 – 18 with packed session tracks covering everything from network monitoring and management, to change control, application management, storage, cloud and DevOps, security, automation, virtualization, mapping, logging, and more.

Register for online sessions.

Home > Success Center > Network Configuration Manager (NCM) > NCM - Knowledgebase Articles > NCM Template - Brocade 6910

NCM Template - Brocade 6910

Table of contents

Updated September 13, 2017

Overview

This article provides an NCM Device Command Template to be used with Brocade 6910 devices.

Environment

  • Any NCM version

Steps

Depending on your version of NCM, use the relevant steps to add the following template. For information, see the Creating and Modifying Templates in the NCM Administrator Guide.

 

Use following lines as the actual content of the template:

 

<Configuration-Management Device="Foundry Devices" SystemOID=" 1.3.6.1.4.1.1991">
  <Commands>
     <Command Name="More" Value=" Others "/>    
 <Command Name="RESET" Value="" />
    <Command Name="Reboot" Value="${SaveConfig}${CR}reload${CRLF}y${CRLF}y" />
    <Command Name="RebootAt" Value="reload at ${HH}:${NN} ${MM}-${DD}-${YY}${CRLF}Yes" />
    <Command Name="EnterConfigMode" Value="config" />
    <Command Name="ExitConfigMode" Value="end" />
    <Command Name="Startup" Value="configuration" />
    <Command Name="Running" Value="running-config" />
    <Command Name="DownloadConfig" Value="Show ${ConfigType}" />
    <Command Name="UploadConfig" Value="${EnterConfigMode}${CRLF}${ConfigText}${CRLF}${ExitConfigMode}" />
    <Command Name="DownloadConfigIndirect" Value="copy ${ConfigType} ${TransferProtocol} ${StorageAddress} ${StorageFilename}" />
    <Command Name="UploadConfigIndirect" Value="copy ${TransferProtocol} ${ConfigType} ${StorageAddress} ${StorageFilename}  " />
    <Command Name="EraseConfig" Value="erase startup" />
    <Command Name="SaveConfig" Value="copy run start" />
    <Command Name="Version" Value="show version" />
  </Commands>
</Configuration-Management>

 

 

Last modified

Tags

Classifications

Public