Submit a ticketCall us

AnnouncementsSystem Monitoring for Dummies

Tired of monitoring failures disrupting the system, application, and service? Learn the key monitoring concepts needed to help you create sophisticated monitoring and alerting strategies that can help you save time and money. Read the eBook.

Get your free eBook.

Home > Success Center > Network Configuration Manager (NCM) > NCM - Knowledgebase Articles > Download the startup config of a context from an ASA device

Download the startup config of a context from an ASA device

Table of contents

Updated February 27, 2018

Overview

This article describes how to download the startup configuration of a context from an ASA device.

Environment

NCM 7.5 and later

Steps

The following example shows how to download the startup config of a context named Public.

  1. Go to Settings > All Settings > NCM Settings > Configs.
  2. Add a config type called Public_Startup.
  3. Edit the template of the ASA device:
      <Commands>
           <Command Name="RESET" Value="terminal pager 0"/>
           <Command Name="Startup" Value="show start"/> 
           <Command Name="Running" Value="show run"/>

           <Command Name="Public_Startup" Value="changeto context Public${CRLF}show start"/>
           <Command Name="DownloadConfig" Value="${ConfigType}" RegEx="#"/>
           <Command Name="UseMultipleDownloadCommands" Value="True"/> 
           <Command Name="Reboot" Value="reload noconfirm"/>
           <Command Name="EnterConfigMode" Value="config terminal"/>
           <Command Name="ExitConfigMode" Value="end"/>
           <Command Name="EraseConfig" Value="write erase${CRLF}Yes"/>
           <Command Name="SaveConfig" Value="write memory"/>
           <Command Name="Version" Value="show version"/>
        </Commands> 
  4. Save the device template and assign it to the device.

 

 

Last modified

Tags

Classifications

Public