Submit a ticketCall us

ebook60.pngHow to be a Cisco® ASA ace

Our eBook, Thou Shalt Not Pass…I Think?! can help you overcome the challenges of monitoring and managing Cisco ASA firewalls. This eBook is a great read if you’ve been frustrated with monitoring firewalls, managing ACL configs, and troubleshooting VPN connections.

Get your free eBook.

Home > Success Center > Network Configuration Manager (NCM) > Fortigate for multiple VDOMs

Fortigate for multiple VDOMs

Updated February 5, 2017

Overview

Fortigate configuration template for Multi Virtual Domains (VDOM).

Environment

All NCM versions

Cause 

Incorrect device template.

Resolution

To resolve this, please use TFTP instead of TELNET/SSH.

Then use the below device template:

<!--SolarWinds Network Management Tools-->
<!--Copyright 2007 SolarWinds.Net All rights reserved-->
<Configuration-Management Device="Fortigate 60" SystemOID=" 1.3.6.1.4.1.12356">
<Commands>
<Command Name="RESET" Value="config system console ${CRLF}set output standard ${CRLF}end"/>
<Command Name="Reboot" Value="execute reboot${CRLF}y${CRLF}"/>
<Command Name="EnterConfigMode" Value="config global"/>
<Command Name="ExitConfigMode" Value="end"/>
<Command Name="Startup" Value="full-configuration"/>
<Command Name="Running" Value=""/>
<Command Name="DownloadConfig" Value="show ${ConfigType}"/>
<Command Name="UploadConfig" Value="${ConfigText}${CRLF}${ExitConfigMode}"/>
<Command Name="DownloadConfigIndirect" Value="execute backup full-config ${TransferProtocol} ${StorageFilename} ${StorageAddress}${CRLF}${CRLF}${CRLF}"/>
<Command Name="UploadConfigIndirect" Value="execute restore full-config tftp ${StorageFilename} ${StorageAddress}${CRLF}${CRLF}"/>
<Command Name="EraseConfig" Value="execute factoryreset${CRLF}y"/>
<Command Name="SaveConfig" Value="execute cfg save"/>
<Command Name="Version" Value="get system status"/>
<Command Name="PreCommand" Value="config global"/>
</Commands>
</Configuration-Management>

You can also download the above device template here.

If you are using SSH on your device connection profile, kindly use the below device template:

<!--SolarWinds Network Management Tools-->
<!--Copyright 2007 SolarWinds.Net All rights reserved-->
<Configuration-Management Device="Fortigate 60" SystemOID=" 1.3.6.1.4.1.12356">    
<Commands>        
    <Command Name="PreCommand" Value="config global${CRLF}config system console${CRLF}set output standard${CRLF}end${CRLF}end" RegEx="#"/>
    <Command Name="RESET" Value=""/>       
    <Command Name="EnterConfigMode" Value="config global"/>               
    <Command Name="vdom" Value="config vdom${CRLF}edit root${CRFL}show full-configuration"/>        
    <Command Name="ExitConfigMode" Value="end"/>
    <Command Name="Startup" Value="full-configuration"/>
    <Command Name="Running" Value="full-configuration"/>
    <Command Name="DownloadConfig" Value="show ${ConfigType}"/>
    <Command Name="UploadConfig" Value="${ConfigText}${CRLF}${ExitConfigMode}"/>        
    <Command Name="DownloadConfigIndirect" Value="execute backup config ${TransferProtocol} ${StorageFilename} ${StorageAddress}${CRLF}${CRLF}${CRLF}"/>        
    <Command Name="UploadConfigIndirect" Value="execute restore config tftp ${StorageFilename} ${StorageAddress}${CRLF}${CRLF}"/>        
    <Command Name="EraseConfig" Value="execute factoryreset${CRLF}y"/>
    <Command Name="SaveConfig" Value="execute cfg save"/>
    <Command Name="Version" Value="get system status"/>
</Commands>
</Configuration-Management>
 

 

Last modified

Tags

Classifications

Public