Submit a ticketCall us

Announcing NPM 12.2
With NPM 12.2 you can monitor your Cisco ASA firewalls, to monitor VPN tunnels for basic visibility and troubleshooting tunnels. NPM 12.2 also uses the SolarWinds Orion Installer so you can easily install and upgrade one or more Orion Platform products simultaneously.
See new features and improvements.

Home > Success Center > Network Configuration Manager (NCM) > Execute the reboot command on Aerohive access points with NCM

Execute the reboot command on Aerohive access points with NCM

Table of contents
Created by John Salvani, last modified by MindTouch on Jun 23, 2016

Views: 202 Votes: 0 Revisions: 4

Overview

This article describes how to execute a reboot command on Aerohive device access points using NCM.

Environment

NCM 7.4

 

Steps

Use the following device template to execute the reboot command in NCM :

 

<!--SolarWinds Network Management Tools-->

<Configuration-Management Device="Cisco Nexus" SystemOID=" 1.3.6.1.4.1.9">

<Commands>

<Command Name="Reset" Value=""/>

<Command Name="PreCommand" Value="${CRLF}"/>

<Command Name="PreCommand" Value="y"/>

<Command Name="Reboot" Value="reboot${CRLF}y${CRLF}y"/>

<Command Name="EnterConfigMode" Value="config terminal"/>

<Command Name="ExitConfigMode" Value="end"/>

<Command Name="Startup" Value="startup"/>

<Command Name="EnableIdentifier" Value="x"/>

<Command Name="Running" Value="running"/>

<Command Name="DownloadConfig" Value="Show ${ConfigType}"/>

<Command Name="UploadConfig" Value="${EnterConfigMode}${CRLF}${ConfigText}${CRLF}${ExitConfigMode}"/>

<Command Name="DownloadConfigIndirect" Value="copy ${ConfigType} ${TransferProtocol}://${StorageAddress}/${StorageFilename} vrf management${CRLF}${CRLF}${CRLF}"/>

<Command Name="UploadConfigIndirect" Value="copy ${TransferProtocol}://${StorageAddress}/${StorageFilename}  ${ConfigType} vrf management${CRLF}${CRLF}"/>

<Command Name="DownloadConfigIndirectSCP" Value="copy ${ConfigType} ${TransferProtocol}://${SCPServerUserName}@${SCPStorageAddress}/${StorageFilename} vrf management${CRLF}${CRLF}${CRLF}${CRLF}${SCPServerPassword}"/>

<Command Name="UploadConfigIndirectSCP" Value="copy ${TransferProtocol}://${SCPServerUserName}@${SCPStorageAddress}/${StorageFilename}  ${ConfigType} vrf management${CRLF}${CRLF}${SCPServerPassword}"/>

<Command Name="EraseConfig" Value="write erase${CRLF}Y"/>

<Command Name="SaveConfig" Value="write memory"/>

<Command Name="SaveAllVDC" Value="saveall"/>

<Command Name="Version" Value="show version"/>

</Commands>

</Configuration-Management>

Last modified
21:06, 22 Jun 2016

Tags

Classifications

Public