Submit a ticketCall us

Putting Your Logs Where They Belong with the New SolarWinds Log Manager for Orion

The new SolarWinds® Log Manager for Orion® finally puts your log data right where it belongs, in the heart of your Orion console. Gain insight into the performance of your infrastructure by monitoring your logs in a unified console allowing you to see a wealth of information about the health and performance of your network and servers.

Reserve a Seat for Wednesday May 23rd 11am CDT | Reserve a Seat for Tuesday May 22nd 10:30am GMT | Reserve a Seat for Tuesday May 22nd 1pm SGT / 3pm AEST

Home > Success Center > Netflow Traffic Analyzer (NTA) > Troubleshoot CBQoS SNMP Walk

Troubleshoot CBQoS SNMP Walk

Table of contents

Updated July 27, 2016

Overview

This article describes how to investigate when CBQos is sending values to NTA.

Environment

All NTA versions

Steps

  1. Find OID .1.3.6.1.2.1.2.2.1.2.[X]. The interface name will appear and [X] is the interface index.
    For example, .1.3.6.1.2.1.2.2.1.2.11 = STRING: "GigabitEthernet0/1.3"
  2. Find OID 1.3.6.1.4.1.9.9.166.1.1.1.1.4.[Y] = [interface index]. 
    Note: [Y] will later be matched with the policy.
    For example, .1.3.6.1.4.1.9.9.166.1.1.1.1.4.176 = INTEGER: 11
    Based on polled SNPM OID by NTA you cal also obtain policy/class names
  3. Find OID 1.3.6.1.4.1.9.9.166.1.15.1.1.17.
    Note: This OID is for drops and if you match it with [Y], you can obtain the values that the device is sending.

    For example:

    .1.3.6.1.4.1.9.9.166.1.15.1.1.17.176.8323105 = COUNTER64: 0
    .1.3.6.1.4.1.9.9.166.1.15.1.1.17.176.15388929 = COUNTER64: 0

 

Last modified

Tags

Classifications

Public