Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Netflow Traffic Analyzer (NTA) > No Egress data for interface

No Egress data for interface

Created by Brian O'Donovan, last modified by Brian O'Donovan on May 18, 2017

Views: 113 Votes: 0 Revisions: 7

Overview

A specific interface is only showing ingress traffic and no egress traffic after confirming that there are no issues with ingress or egress traffic using a Wireshark trace. 

Environment

All NTA versions

Cause 

Data is not reaching NTA due to a device or device configuration issue.

Resolution

Configure the device to send egress information about this interface to NTA. If the device is configured properly and there is still no data, log a support case with the vendor.

 

 

Last modified
02:14, 18 May 2017

Tags

Classifications

Public