Submit a ticketCall us

Announcing NPM 12.2
With NPM 12.2 you can monitor your Cisco ASA firewalls, to monitor VPN tunnels for basic visibility and troubleshooting tunnels. NPM 12.2 also uses the SolarWinds Orion Installer so you can easily install and upgrade one or more Orion Platform products simultaneously.
See new features and improvements.

Home > Success Center > Netflow Traffic Analyzer (NTA) > Netflow config for F5 device

Netflow config for F5 device

Table of contents
Created by Daniel Phillipps, last modified by MindTouch on Jun 23, 2016

Views: 466 Votes: 0 Revisions: 5

Overview

This article provides steps on how to configure Netflow for F5 device.  

 

Please Note: F5 devices running TMOS 11.4.0 or higher support the required sFlow fields.  Older versions do not support the required fields.

Environment

NTA version 4.x

Steps

On how to add a performance monitoring sFlow receiver, see:

F5 Support

https://support.f5.com/kb/en-us/prod...-11-3-0/9.html

 

Gather the IP addresses of the sFlow receivers that you want to add to the BIG-IP® system configuration. You can use IPv4 and IPv6 addresses.
Note: You can add an sFlow receiver to the BIG-IP system only if you are assigned either the Resource 
Administrator or Administrator user role. 
Add an sFlow receiver to the BIG-IP system when you want to use the receiver to monitor system performance. Do this by following the steps below:

1. On the Main tab, click System > Performance > sFlow. The sFlow screen opens.
2. Click Add. 
3. In the Name field, type a name for the sFlow receiver.
4. In the Address field, type the IPv4 or IPv6 address on which the sFlow receiver listens for UDP datagrams.
Note: The IP address of the sFlow receiver must be reachable from a self IP address on the BIG-IP system.
5. Click Finish.

 

 

 

Last modified
20:35, 22 Jun 2016

Tags

Classifications

Public