Submit a ticketCall us

Announcing NPM 12.2
With NPM 12.2 you can monitor your Cisco ASA firewalls, to monitor VPN tunnels for basic visibility and troubleshooting tunnels. NPM 12.2 also uses the SolarWinds Orion Installer so you can easily install and upgrade one or more Orion Platform products simultaneously.
See new features and improvements.

Home > Success Center > Netflow Traffic Analyzer (NTA) > NTA received a packet indicating that NetFlow data export on device x.x.x.x is not enabled. If you cannot see NetFlow data from the device in NTA, make sure the device is configured to export NetFlow

NTA received a packet indicating that NetFlow data export on device x.x.x.x is not enabled. If you cannot see NetFlow data from the device in NTA, make sure the device is configured to export NetFlow

Updated December 5, 2016

Overview

The following message appears on the NTA summary page in the Last 25 Traffic Analyzer Event:

NTA received a packet indicating that NetFlow data export on device x.x.x.x is not enabled. If you cannot see NetFlow data from the device in NTA, make sure the device is configured to export NetFlow

Environment

All NTA versions

 

Cause 

This is a device issue. The device is sending flows that have both the input interface index and output interface index numbers set to 0.

 

Resolution

Confirm via Wireshark what input and output interfaces index numbers are in the flows. If they are both 0, refer to your  vendor.

 

 

 

 

Last modified
23:16, 4 Dec 2016

Tags

Classifications

Public