Submit a ticketCall us

AnnouncementsTHWACKcamp 2018 is here

2018 is the seventh year for THWACKcamp™, and once again we’ll be live October 17 – 18 with packed session tracks covering everything from network monitoring and management, to change control, application management, storage, cloud and DevOps, security, automation, virtualization, mapping, logging, and more.

Register for online sessions.

Home > Success Center > Netflow Traffic Analyzer (NTA) > NTA Documentation > NTA 4.4 Administrator Guide > Device configuration examples > Enabling NetFlow and NetFlow Data Export (NDE) on Cisco Catalyst Switches > Cisco Catalyst 4500 series

Cisco Catalyst 4500 series

Created by Caroline Juszczak, last modified by Alexandra.Nerpasova on Oct 21, 2016

Views: 756 Votes: 0 Revisions: 4

The following sections provide the procedures required to enable NetFlow and NetFlow export to Orion NetFlow Traffic Analyzer from the Catalyst 4500 Series.

This information is provided as a guide for enabling NetFlow to work with SolarWinds NTA. Consult your Cisco product documentation for details about configuring NetFlow on Cisco Catalyst 4500 Series devices.

Enable NetFlow to work with SolarWinds NTA

The Catalyst 4500 platform requires a NetFlow Services Card installed to enable NetFlow.

  1. Configure your switch for IP routing.
  2. Log in to the switch, and then enter global configuration mode.
  3. Enter ip flow ingress infer-fields to enable NetFlow for IP routing with inferred input/output interfaces and source/destination border gateway protocol (BGP) as information.

    You must enable the infer-fields option to determine any autonomous system information.

Configure the SolarWinds NTA server as a NetFlow destination

  1. Log in to the switch and enter global configuration mode.
  2. Type ip flow-export destination {hostname | ip-address} udp-port to direct exported NetFlow data to SolarWinds NTA, as in this example, where SolarWinds NTA is hosted on TAHost:

    ip flow-export destination TAHost 2055

    If you need to send data to more than one destination, you can specify up to two different destinations using successive calls of this command.

  3. Type ip flow-export version 5|9 {origin-as | peer-as} to set the NetFlow version for use with SolarWinds NTA.
    • Select origin-as to direct NetFlow to determine the origin BGP autonomous system of both the source and the destination hosts of the flow, as in:

      ip flow-export version 5|9 origin-as

    • Select peer-as to direct NetFlow to determine the peer BGP autonomous system of both the input and output interfaces of the flow, as in:

      ip flow-export version 5|9 peer-as

  4. Type ip flow-export source interface to specify the interface that provides the source IP address in the IP header of the NDE packet. The default is the NDE output interface.

Display the NetFlow configuration for verification

  1. Enter privileged EXEC mode on your switch.
  2. Type show ip flow export to display statistics and cache contents for your NetFlow configuration.

 
Last modified

Tags

Classifications

Public