Submit a ticketCall us

AnnouncementsFace your biggest database issues head-on

Our new eCourse helps you navigate SQL Server performance blocks by teaching you how to recognize and deal with the three DBA Disruptors: Performance Hog, Blame Shifter, and Query Blocker. Register today to learn how to defend your environment and fend off menacing disruptions.

Register for your free eCourse.

Home > Success Center > Netflow Traffic Analyzer (NTA) > NTA Documentation > NTA 4.4 Administrator Guide > Get started with NTA > Configuring NetFlow export on the device

Configuring NetFlow export on the device

The Configure Device to Export NetFlow Data page displays information retrieved from the current configuration file on the appropriate device. Define the NetFlow version and ingress or egress interfaces for export. Further on, define collectors that will be listening for NetFlow data.

Poller requirements

When specifying the devices where you want to send exported flows, you can enter up to two devices. Consider the following:

  • You must specify at least one device where flows should be sent. If no devices are specified, flow export will be configured on interfaces, but SolarWinds NTA will not get the flow data.
  • At least one of the specified devices must be SolarWinds NTA poller. Without the poller definition, flow export will be configured on interfaces, but SolarWinds NTA will not get the data.
  • Make sure that you do not specify your main SolarWinds NTA poller as one device and an additional SolarWinds NTA poller as the other device. If you do, SolarWinds NTA will get the same data twice, and duplicate the data.
  • You need to provide a hostname or IP address and a matching port.
  • You cannot use the same device twice. The IP addresses must differ.

Configure the NetFlow export

  1. Select the appropriate NetFlow version to be exported in the NetFlow Version list.
  2. Define one or more devices, such as SolarWinds NTA pollers, where flows will be sent. Fill in hostnames or IP addresses and appropriate ports.
  3. Select interfaces from which you want to export traffic data.
  4. Select I Understand, and click Configure to apply changes in the running-config file.

Last modified