Submit a ticketCall us
Home > Success Center > Netflow Traffic Analyzer (NTA) > NTA 4.4 Administrator Guide > Device configuration examples > Enabling NetFlow and NetFlow Data Export (NDE) on Cisco Catalyst Switches

Enabling NetFlow and NetFlow Data Export (NDE) on Cisco Catalyst Switches

Table of contents
No headers
Created by Caroline Juszczak, last modified by Alexandra.Nerpasova on Oct 21, 2016

Views: 1,705 Votes: 0 Revisions: 5

NetFlow and NetFlow Data Export are required by SolarWinds NetFlow Traffic Analyzer. NetFlow collects traffic statistics by monitoring packets that flow through a given network device. These statistics are then stored in a NetFlow table. NetFlow Data Export (NDE) converts the NetFlow table statistics into records and exports the records to SolarWinds NTA for analysis and presentation. SolarWinds NTA supports NetFlow versions 5 and 9.

Unless stated otherwise, this document refers to Cisco Internetwork Operating System (IOS) Releases 12.2(18)SXD and higher. This information is adapted from original Cisco documentation. This information is not intended as a substitute or replacement for your original Cisco documentation or the advice of your Cisco technical support representative.

Due to significant differences in the availability of the commands required to enable NetFlow and NetFlow Data Export, SolarWinds does not support the use of Cisco IOS versions older than 12.2(18)SXD.

 

 
Last modified

Tags

Classifications

Public