Submit a ticketCall us

ebook60.pngHow to be a Cisco® ASA ace

Our eBook, Thou Shalt Not Pass…I Think?! can help you overcome the challenges of monitoring and managing Cisco ASA firewalls. This eBook is a great read if you’ve been frustrated with monitoring firewalls, managing ACL configs, and troubleshooting VPN connections.

Get your free eBook.

Home > Success Center > Netflow Traffic Analyzer (NTA) > NTA 4.2.3 Administrator Guide > NTA settings > Applications and service ports

Applications and service ports

 

SolarWinds NTA allows you to directly specify the applications and ports you want to monitor. Additionally, you can specify protocol types by application, giving you the ability to monitor multiple applications on the same port if each application uses a different protocol. You should review this list of ports and applications and check the ports and applications you want to monitor, adding any that are not present.

By default, SolarWinds NTA monitors recommended ports and applications that are used most on typical networks.

SolarWinds NTA supports many applications out of the box. However, if you have custom internal applications, remember to assign a port name and number to them so that they are reported correctly and not marked unknown.

Access the applications and service ports settings

  1. Click Settings > All Settings.
  2. Under Product Specific Settings, click NTA Settings.
  3. Click Application and Service Ports.

 
Last modified

Tags

Classifications

Public