Submit a ticketCall us

ebook60.pngHow to be a Cisco® ASA ace

Our eBook, Thou Shalt Not Pass…I Think?! can help you overcome the challenges of monitoring and managing Cisco ASA firewalls. This eBook is a great read if you’ve been frustrated with monitoring firewalls, managing ACL configs, and troubleshooting VPN connections.

Get your free eBook.

Home > Success Center > Netflow Traffic Analyzer (NTA) > NTA 4.2.3 Administrator Guide > Get started with NTA > Stop monitoring NetFlow data from a device

Stop monitoring NetFlow data from a device

If you do not want to monitor flow traffic on a device, you have the following options:

  • Configure the device to stop sending flow data on interfaces.
  • Keep the flow export as is, but configure the device not to send flows to any pollers.

You can also keep exporting flow data, but disable polling the data for the device. For more information, see Delete flow sources and CBQoS-enabled devices.

Requirements

Stop NetFlow export on interfaces

  1. On the Configure Source page, go to the Interfaces table.
  2. Clear Send Ingress Data and Send Egress Data for all interfaces.
  3. Select I Understand.
  4. Click Configure Now to apply your changes to the running-config file on the device.

Stop sending exported flow data to a SolarWinds NTA poller

  1. On the Configure Source page, go to the Send Flows To section.
  2. Clear all boxes for Device 1 and Device 2.
  3. Select I Understand.
  4. Click Configure Now to apply your changes to the running-config file on the device.
  5. Confirm the error message informing you that flows will not be collected on any poller, and SolarWinds NTA will not be able to display the appropriate flow data.

 

 
Last modified

Tags

Classifications

Public