Hide this message
Welcome to the NEW Success Center. Search all resources (documentation, videos, training, knowledge base articles) or browse resources by product. If you are unable to find what you are looking for, please contact us at firstname.lastname@example.org
This article provides an example of configuring J-Flow on an SRX Series device. NOTE: SRX devices support J-Flow versions 5 and 8. SolarWinds Netflow only supports and will process J-Flow version 5.
The following procedure provides an example of J-Flow configuration.
user@host# set interfaces ge-0/0/0 unit 0 family inet sampling input
user@host# set interfaces ge-0/0/0 unit 0 family inet sampling output
Caution: Activation of flow collection can have a significant impact on the performance of the SRX Series device. The smaller the sample rate, the bigger the impact. We recommend that you do not use a sampling input rate of 1.
user@host# set forwarding-options sampling input rate 100
user@host# set forwarding-options sampling family inet output flow-server 10.10.10.1 port 2055
Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third party content at your own risk, and you will be solely responsible for the incorporation of the same, if any.