Submit a ticketCall us
Home > Success Center > Netflow Traffic Analyzer (NTA) > NTA - Knowledgebase Articles > NetFlow Configuration Example - Cisco ASA

NetFlow Configuration Example - Cisco ASA

Table of contents


In order to see flow data from your Cisco ASA in SolarWinds NTA, you must configure the device to export flow data. This article includes an example configuration you can use to build your own configuration specific to your environment.


  • Cisco ASA 55xx-x
  • All NTA versions


Configuration example:


flow-export destination inside 2055 
flow-export template timeout-rate 1 
flow-export delay flow-create 60 
access-list netflow-export extended permit ip any any 
class-map netflow-export-class 
match access-list netflow-export 
policy-map global_policy 
class netflow-export-class 
flow-export event-type all destination 
service-policy global_policy global


You can only configure a device through the ASDM console per security reasons. Below is an article of an example configuration walk through:


Helpful links


Link to Cisco ASA 9.1.(2) or higher software version Netflow configuration:


Last modified