Submit a ticketCall us

AnnouncementsTHWACKcamp 2018 is here

2018 is the seventh year for THWACKcamp™, and once again we’ll be live October 17 – 18 with packed session tracks covering everything from network monitoring and management, to change control, application management, storage, cloud and DevOps, security, automation, virtualization, mapping, logging, and more.

Register for online sessions.

Home > Success Center > Netflow Traffic Analyzer (NTA) > NTA - Knowledgebase Articles > Example NetFlow Config - Cisco 6500 series native IOS

Example NetFlow Config - Cisco 6500 series native IOS

Table of contents
Created by Justin Wyllys, last modified by MindTouch on Jun 23, 2016

Views: 2,078 Votes: 0 Revisions: 3

Overview

In order to receive flow data from your Cisco 6500 in SolarWinds NTA, you must configure it to export NetFlow data. This article includes an example config to build your own config specific to your environment.

Environment

  • Cisco 6500 series native IOS
  • All NTA versions

Detail

 

Cisco 6509 Native IOS Global Configuration:

!

mls ip multicast flow-stat-timer 9
mls aging long 64

!

mls aging normal 32
mls flow ip interface-full 
mls nde sender version 5

!

ip flow ingress layer2-switched vlan xxxx (separate each VLAN with a comma)
ip flow-export source (Port/Interface with the IP address that is being monitored in Orion)
ip flow-export version 5
ip flow-export destination IP_Address (Orion NPM server)  2055

!

Note: CEF must be enabled on some devices in order for Netflow to work properly.
 
Layer 3 interfaces:

Ip route-cache flow


VLANS:

Ip flow ingress

 

Last modified

Tags

Classifications

Public