Submit a ticketCall us

Training ClassThe Orion® Platform Instructor-led Classes

Provided by SolarWinds® Academy, these trainings will introduce users to the Orion Platform and its features, management, and navigation. These courses are suitable for users looking to discover new tips, tricks, and ways to adapt their Orion products to better suit their monitoring needs:
Deploying the Orion Platform
Configuring Orion views, maps, and accounts
Configuring Orion alerts and reports

Reserve your seat.

Home > Success Center > Netflow Traffic Analyzer (NTA) > NTA - Knowledgebase Articles > Cisco Wireless Controller Netflow config sample

Cisco Wireless Controller Netflow config sample

Table of contents
Created by Daniel Phillipps, last modified by Joseph Esquitin on Sep 07, 2017

Views: 5,438 Votes: 1 Revisions: 6

Overview

This article provides steps on how to configure the Cisco Wireless Controller for Netflow.

Environment

  • NTA version 3.11
  • NTA version 4.x

Steps

Configure the Exporter by following these steps:  

  1. Choose Wireless > Netflow > Exporter.
  2. Click New.
  3. Enter the Exporter name, IP address, and the port number. The valid range for the port number is from 1 to 65535.
  4. Click Apply.
  5. Click Save Configuration.

Note: Only one exporter can be added in the WLC.

 

Configure the NetFlow Monitor by following these steps:

  1. Choose Wireless > Netflow > Monitor.
  2. Click New and enter the Monitor name.
  3. On the Monitor List page, click the Monitor name to open the Netflow Monitor > Edit page.
  4. Choose the Exporter name and the Record name from the respective drop-down lists.
  5. Click Apply.
  6. Click Save Configuration.

Note: Only one Monitor entry can be added in the WLC.

 

Associate a NetFlow Monitor to a WLAN by following these steps:

  1. Choose WLANs and click the WLAN ID to open the WLANs > Edit page.
  2. In the QoS tab, choose the NetFlow Monitor from the Netflow Monitor drop-down list.
  3. Click Apply.
  4. Click Save Configuration.

Note: Application Visibility has to be enabled for the NetFlow Monitor to work.

 

 

Last modified

Tags

Classifications

Public