Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Netflow Traffic Analyzer (NTA) > Example Nexus 7000 Config, flexible v9 specific

Example Nexus 7000 Config, flexible v9 specific

Table of contents
Created by Eric Bryant, last modified by MindTouch on Jun 23, 2016

Views: 321 Votes: 0 Revisions: 5

Overview

This article shows a sample Nexus 7000 series configuration.

Environment

All NTA versions

Detail

!
flow record ipv4
match ipv4 tos
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
match interface input
collect interface output
collect counter bytes
collect counter packets
!
flow exporter NetFlow-to-Orion
destination 10.10.10.10 (ip address of Orion server)
source vlan254 (interface with IP address Orion is managing the device with)
transport udp 2055 (Netflow collector port)
export-protocol Netflow version 9
template data timeout 60 (This will ensure the template is exported every 1 minute, default is 600 seconds)
!
flow monitor NetFlow-Monitor
description Original Netflow captures
record ipv4
exporter NetFlow-to-Orion
cache timeout inactive 10
cache timeout active 1
!
vlan configuration 777 
ip flow monitor NetFlow-Monitor input
!

 

See more information on:

netflow-nexus7000-nsox-configex.pdf

 

 

Last modified
20:32, 22 Jun 2016

Tags

Classifications

Public