Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Netflow Traffic Analyzer (NTA) > Cisco Wireless Controller Netflow config sample

Cisco Wireless Controller Netflow config sample

Table of contents
Created by Daniel Phillipps, last modified by Joseph Esquitin on Sep 07, 2017

Views: 869 Votes: 1 Revisions: 6

Overview

This article provides steps on how to configure the Cisco Wireless Controller for Netflow.

Environment

  • NTA version 3.11
  • NTA version 4.x

Steps

Configure the Exporter by following these steps:  

  1. Choose Wireless > Netflow > Exporter.
  2. Click New.
  3. Enter the Exporter name, IP address, and the port number. The valid range for the port number is from 1 to 65535.
  4. Click Apply.
  5. Click Save Configuration.

Note: Only one exporter can be added in the WLC.

 

Configure the NetFlow Monitor by following these steps:

  1. Choose Wireless > Netflow > Monitor.
  2. Click New and enter the Monitor name.
  3. On the Monitor List page, click the Monitor name to open the Netflow Monitor > Edit page.
  4. Choose the Exporter name and the Record name from the respective drop-down lists.
  5. Click Apply.
  6. Click Save Configuration.

Note: Only one Monitor entry can be added in the WLC.

 

Associate a NetFlow Monitor to a WLAN by following these steps:

  1. Choose WLANs and click the WLAN ID to open the WLANs > Edit page.
  2. In the QoS tab, choose the NetFlow Monitor from the Netflow Monitor drop-down list.
  3. Click Apply.
  4. Click Save Configuration.

Note: Application Visibility has to be enabled for the NetFlow Monitor to work.

 

 

Last modified
11:55, 7 Sep 2017

Tags

Classifications

Public