Submit a ticketCall us

Have You Auto Renewed? If not, you're missing out.
The SolarWinds Renewal Program comes with a host of benefits including the most recent product updates, 24/7 technical support, virtual instructor-led training and more. Experience all of this with the convenience of Auto Renewal, and never worry about missing any of these great benefits. Learn More.

Home > Success Center > Log & Event Manager (LEM) > LEM Administrator's Guide > Use the LEM Getting Started Wizard

Use the LEM Getting Started Wizard

Updated: September 15, 2017

The LEM Getting Started wizards guides you through a series of setup tasks, including:

  • Mail server integration
  • Active Directory monitoring
  • Adding additional devices and systems that LEM should monitor, such as firewalls and user workstations
  • Basic rules setup that defines how LEM alerts you when specific conditions occur on your network

Open the Getting Started wizards

  1. Open the LEM console. See Log in to the LEM web console or Log in to the LEM desktop console for steps.

  2. Click the OpsCenter tab.

    By default, the Getting Started widget is located in the top left part of the page.

    File:Success_Center/Reusable_content_-_InfoDev/LEM/Log_and_Event_Manager_Administrator's_Guide/LEM_Administrator's_Guide/0080-Use_the_LEM_Getting_Started_Wizard/lem_qsg_getting_started_widget.png

  3. Choose from the following:

Use the Configure Basic LEM Settings wizard to set up Active Directory monitoring and email alerts

Use this wizard to connect LEM to:

  • Your mail server so that LEM can send out email alerts
  • Active Directory so that LEM can alert you to changes in your AD groups and also monitor AD accounts

Set up LEM to send Email Alerts

Configure email alerting so that users receive email alerts when assigned alert events occur. LEM can connect to an email server or SMTP relay server to forward email notifications. If you already configured email alerts, click Skip to go to the "Configure Active Directory Connection" screen.

You will need the following information to complete this task:

  • The IP address or hostname of your primary or relay email server
  • A valid email address you can use for testing

 

To edit email alert settings at a later date, see Configure the Email Active Response connector in LEM for steps.

To configure email alerting:
  1. If you have not yet done so, open the "Configure Basic LEM Settings" wizard so that the "Configure Email Alerting" screen is displayed. See Open the Getting Started wizards for help.

  2. Complete the form:

    Field Description
    Mail Host Enter the name or IP address of your SMTP mail server.
    Port Enter the port number your SMTP server uses if it does not use port 25.
    Transport Protocol

    Enter the protocol for sending outbound email messages from LEM Manager to the email server. Choose from SMTP, SSL, or TLS.

    If you choose SSL or TLS, be sure to enter the correct port number in the port field. SolarWinds strongly recommends using TLS or SSL if you use a third-party email server.

    Return Address Enter a return email address that is appropriate for your domain, for example noreply@example.com.
    Return Display Name Enter an appropriate display name for email messages sent from LEM Manager. For example, you can enter System Alert or Security Alert.
    Authentication Server User Name If your email server requires you to authenticate before you send an email, or if you use a third-party service such as Microsoft Office 365, enter the user account that LEM Manager can use to authenticate to your email host.
    Authentication Server Password Enter the password for the user account.
  3. If you are using a secured email server, add the LEM VM IP address as an authorized source.

  4. Click "Test Connection" to test your settings.

    Email alerting is properly configured if you receive a SolarWinds test message.

  5. Click Next to go to the "Configure Active Directory Connection" screen.

See also:

Set up LEM to monitor Active Directory Accounts

Complete this configuration so that LEM can monitor Active Directory (AD) accounts and alert you to changes to AD accounts and groups. After completing the form, LEM will establish an LDAP connection to your Active Directory server and import your organizational groups.

This configuration step allows LEM to monitor Active Directory accounts. It does not allow users to log in to LEM with their Active Directory credentials. See Set up Active Directory authentication in LEM to configure LEM for Active Directory authentication.

To configure LEM to connect to Active Directory
  1. Be sure that the "Configure Basic LEM Settings" wizard is open and the "Configure Active Directory Connection" screen is displayed. See Open the Getting Started wizards for help.

  2. Complete the form:

    Field Description
    Domain Name Enter the fully-qualified domain name of the Active Directory server.
    Directory Service Server Enter the IP address or host name of the Active Directory server. This server is commonly the domain controller.
    User Name Enter the user account that LEM Manager should use to authenticate to Active Directory if authentication is required to connect to the server.
    Password Enter the password for the account.
    Encryption Choose "TLS" or "SSL" if the Active Directory server supports encryption. Otherwise, choose "No SSL" to leave communications unencrypted.
    Custom Port If using a non-standard port number, enter it here.

     

  3. Click "Test Domain Connection" to test your settings.

    If the test is successful, the Active Directory connection is now enabled.

  4. Click Finish.

Use the Add Nodes wizard to add a syslog node to LEM

The "Add Nodes" wizard steps you through adding a network device node to LEM.

 

Add a syslog node with the Add Nodes wizard

  1. In the Getting Started wizards section, click "Add Nodes to Monitor." See Open the Getting Started wizards for help.

  2. Select "syslog" from the Select node type menu.

    The "Add Node(s)" screen opens.

  3. Complete the form:

    1. Step 1: Provide node information – Enter either the IP address or the hostname of the syslog node that you are adding to LEM, then select a name from the Vendors list.

    2. Step 2: Configure node so LEM can receive its Syslog messages – Follow the onscreen steps and select the "I have configured this node so that LEM can receive its Syslog messages" check box.

    3. Click Next.

      LEM scans for new devices and the "Nodes Found" tab opens.

See Add syslog and Agent nodes to LEM for information about adding other types of nodes.

See also:

Use the Add Rules wizard to set up LEM rules

The Add Rules wizard guides you through the following tasks, which are required to enable bulk basic rules:

  • Set up email actions
  • Set up email alert recipients
  • Set up rule categories. The wizard suggests important rules to enable.

Add a rule with the Add Rules Wizard

  1. Click "Define Rules and Configure Alerts" to open the wizard. See Open the Getting Started wizards for help.

    You can also open the LEM rules wizard by choosing Build > Rules and clicking Add Rules in the Rules area.

  2. Select the rules categories you wish to use from the Rules Category screen, and then click Next.

    File:Success_Center/Reusable_content_-_InfoDev/LEM/Log_and_Event_Manager_Administrator's_Guide/LEM_Administrator's_Guide/0080-Use_the_LEM_Getting_Started_Wizard/rulescategories1_480x261.png

  3. Select the rules to add within the chosen categories, and then click Next.

    File:Success_Center/Reusable_content_-_InfoDev/LEM/Log_and_Event_Manager_Administrator's_Guide/LEM_Administrator's_Guide/0080-Use_the_LEM_Getting_Started_Wizard/rulescategories2_480x261.png

  4. Configure your Email Server Settings if you have not already done so previously. See Set up LEM to send Email Alerts for more information.
  5. Select the email recipients, and then click Next.
  6. Review the rules summary page for all rule categories, and then click Finish.

See Find and add LEM rules for more information about adding rules.

Last modified

Tags

Classifications

Public