This feature is available only in the licensed version.
You can add an action to send an SNMP trap to the specified host.
From the Action menu, select Send SNMP Trap.
Specify the following options.
|Forward SNMP Trap without changing||Select this option to forward the original SNMP trap to destination host.|
|Destination host||Enter the IP address of the system that will be receiving the SNMP trap.|
Select IPv6 to send SNMP traps to an IPv6 address.
To forward incoming IPv6 trap messages, select the IPv6 option.
|Remote port|| |
Enter the port to which the SNMP trap will be sent. The default is 162.
If you change this setting, you will need to configure the receiving device to "listen" for SNMP traps on the same port number.
|Message text||Enter the content of the SNMP trap to be forwarded. Click Insert message content or counters to insert content using variables.|
|Agent IP address|| |
Enter the IP address that will appear as the source of the SNMP trap. By default this is set to "The original sender" but can be set to "From this machine" (that is, the address of the machine running the Kiwi Syslog Server).
|Generic type|| |
For version 1 traps, select the type of trap to be sent:
|Enterprise OID|| |
For version 1 traps, enter a dotted numerical value (22.214.171.124.x.x.x.x) that represents the MIB enterprise of the SNMP trap.
Version 2 traps have the Enterprise value bound as the second variable in the message.
If the Generic Type is set to 6, it indicates an Enterprise type trap. In this case the Specific Trap value needs to be considered.
|Variable OID||Specify a dotted decimal value (126.96.36.199.x.x.x.x) that represents that MIB variable of version 2 SNMP traps.|
|Community||This is like a password that is included in the trap message. Normally this is set to values such as "public", "private" or "monitor".|
|Specific type||This is a value that indicates the condition that caused the trap to be sent. In version 2 traps, this condition will be unique to the MIB defined for the particular device sending the trap (or syslog message).|
Select the version used to send SNMP traps to another syslog server. If you select version 3, provide the User Name, Local Engine ID, Authentication Password, Encryption Password, Protocol, and Algorithm.
Version type for SNMP traps (version 1, 2 or 3) should be selected to send the traps to another syslog server. For example, you leave the encryption password and algorithm, it acts as 'authentication only' security level.
To send version 3 traps, SNMP credentials are required on both the receiving and sending sides.