Submit a ticketCall us

Have You Auto Renewed? If not, you're missing out.
The SolarWinds Renewal Program comes with a host of benefits including the most recent product updates, 24/7 technical support, virtual instructor-led training and more. Experience all of this with the convenience of Auto Renewal, and never worry about missing any of these great benefits. Learn More.

Home > Success Center > Kiwi Syslog Server > Kiwi Syslog Server Administrator Guide > Configure devices to send messages to Kiwi Syslog Server

Configure devices to send messages to Kiwi Syslog Server

Table of contents
No headers

To receive messages from a syslog-capable device, configure the device to send syslog messages to the appropriate port on the computer where Kiwi Syslog Server is installed.

Kiwi Syslog Server automatically listens for UDP messages on port 514. This is the default port for devices sending syslog messages as defined by the RFC standard 5426.

You can configure Kiwi Syslog Server to listen for UDP message on a different port. You can also enable Kiwi Syslog Server to listen for TCP messages, secure TCP messages, and SNMP traps.

For information about configuring a specific device, see documentation from the device manufacturer. The Kiwi Syslog Server Getting Started Guide provides an example of configuring a Cisco switch.

Message logging must be enabled on the device. On many devices that generate syslog messages, logging is enabled by default.

If you have configured devices but Kiwi Syslog Server is not displaying messages, see the troubleshooting tips in the Getting Started Guide.

 

Last modified

Tags

Classifications

Public