Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Kiwi CatTools > Kiwi CatTools 3.11 Administrator Guide > Menus > Options > DNS Resolver

DNS Resolver

Table of contents
No headers

To set DNS resolver options, choose Options >??Setup > TFTP Server >??DNS Resolver.

DNS Resolver resolves the IP addresses in ARP reports based on the server settings below.

??

Note: The Resolve IP addresses to Hostnames check box must be checked.

??

1. Select either Resolve using known DNS server(s) or Resolve by auto detection of DNS server(s).

??

2. By default there is a list of internal IP address ranges listed (10.x.x.x , 192.168.x.x , 169.254.x.x , 172.16.x.x , 172.17.x.x , 172.18.x.x , 172.19.x.x , 172.20.x.x , 172.21.x.x , 172.22.x.x , 172.23.x.x , 172.24.x.x , 172.25.x.x , 172.26.x.x , 172.27.x.x , 172.28.x.x , 172.29.x.x , 172.30.x.x , 172.31.x.x)

??

3. To add more internal IP address ranges, click Add. You can remove any added ranges by selecting the range and then clickin Remove.

??

4. Select the NetBIOS/DNS Server to resolve.

??

5. Enter the primary and alternate DNS server IP addresses for both internal and external DNS servers.

??

6. Specify the days to flush DNS cache.

??

7. Specify DNS Query time out.

??

8. Save the changes.

??

??

Last modified
10:56, 2 Sep 2016

Tags

This page has no custom tags.

Classifications

Public