Submit a ticketCall us

whitepaperYour VM Perplexities Called, and They Need You to Read This.

Virtualization can give you enormous flexibility with future workloads and can be a key enabler for other areas, like cloud computing and disaster recovery. So, how can you get a handle on the performance challenges in your virtual environment and manage deployments without erasing the potential upside? Learn the four key areas you need to be focusing on to help deliver a healthy and well-performing data center.

Get your free white paper.

Home > Success Center > IP Address Manager (IPAM) > IPAM - Knowledgebase Articles > Error adding DHCP scopes from DHCP servers running on Cisco devices

Error adding DHCP scopes from DHCP servers running on Cisco devices

Created by Interspire Import, last modified by MindTouch on Jun 23, 2016

Views: 1,111 Votes: 0 Revisions: 8


When a DHCP server is added to IPAM, it shows the number of DHCP scopes discovered after successfully validating the credentials. But after clicking Save, the scopes are not added to the list.


All versions of IPAM


Note: Before doing any work on your Cisco routers, make sure that you have a current backup, as this makes a permanent change to your router.

Add the network address and subnet mask while creating DHCP pool in Cisco devices.

Execute the following commands in config mode on the Cisco Router:

# These 4 commands remove the pools:

no ip dhcp pool Tananger.Desktop 
no ip dhcp pool Tananger.Voice
no ip dhcp pool Tananger.PagingGateway
no ip dhcp pool Dymo.Printer

# The below commands re-add the same scopes, they are just re-arranged

ip dhcp pool Dymo.Printer
hardware-address 0011.e502.a61d

ip dhcp pool Tananger.PagingGateway
hardware-address 000d.b928.d330

ip dhcp pool Tananger.Desktop
domain-name exprogroup.local
option 150 ip

ip dhcp pool Tananger.Voice
option 150 ip 
domain-name exprogroup.local

There are four pools defined in the Cisco router. But the host declaration pools are not recognized as separate pools. Instead, the host declaration appears as a reservation within the scope containing the complete network.


The DHCP pools are configured without the network IP and subnet mask. IPAM will not accept the DHCP pool without the network and mask value.

Last modified