Submit a ticketCall us

Putting Your Logs Where They Belong with the New SolarWinds Log Manager for Orion

The new SolarWinds® Log Manager for Orion® finally puts your log data right where it belongs, in the heart of your Orion console. Gain insight into the performance of your infrastructure by monitoring your logs in a unified console allowing you to see a wealth of information about the health and performance of your network and servers.

Reserve a Seat for Wednesday May 23rd 11am CDT | Reserve a Seat for Tuesday May 22nd 10:30am GMT | Reserve a Seat for Tuesday May 22nd 1pm SGT / 3pm AEST

Home > Success Center > IP Address Manager (IPAM) > IPAM Administrator Guide > IP Address Monitoring with IPAM > Set an IP address status to Available Used Transient or Reserved

Set an IP address status to Available Used Transient or Reserved

Table of contents
No headers
Created by Nanette.Neal, last modified by Kevin.Kessler-ret on Oct 25, 2017

Views: 873 Votes: 0 Revisions: 2

The status of any monitored IP address within a defined subnet may be set from the IP Address View on the Manage Subnets and IP Addresses page, as shown in the following procedure.

If a subnet contains more than 4096 IP addresses (lower than /20 or 255.255.240.0 mask), Orion IPAM only displays IP addresses in previously added ranges. For these larger subnets, you must add IP address ranges for monitoring before Orion IPAM can display addresses that may be managed.

To set the status of an IP address within a defined subnet:

  1. Click IP Address Manager in the Menu bar.
  2. Click Manage Subnets & IP Addresses, and then click the subnet containing the IP address for which you want to set the status in the left tree pane.

    For subnets with more than 4096 IP addresses (lower than /20 or 255.255.240.0 mask), the right pane displays No IP addresses have previously been added unless you have already added a range of IP addresses within the selected subnet.

  3. Check the IP addresses to modify in the right pane IP Address view.
  4. Click Set Status, and then select the appropriate status. For more information about the definition of available status icons, see IPAM Status Icons.
Last modified

Tags

Classifications

Public