The status of any monitored IP address within a defined subnet may be set from the IP Address View on the Manage Subnets and IP Addresses page, as shown in the following procedure.
If a subnet contains more than 4096 IP addresses (lower than /21 or 255.255.248.0 mask), Orion IPAM only displays IP addresses in previously added ranges. For these larger subnets, you must add IP address ranges for monitoring before Orion IPAM can display addresses that may be managed.
To set the status of an IP address within a defined subnet:
- Click IP Address Manager in the Menu bar.
- Click Manage Subnets & IP Addresses, and then click the subnet containing the IP address for which you want to set the status in the left tree pane.
For subnets with more than 4096 IP addresses (lower than /21 or 255.255.248.0 mask), the right pane displays No IP addresses have previously been added unless you have already added a range of IP addresses within the selected subnet.
- Check the IP addresses to modify in the right pane IP Address view.
- Click Set Status, and then select the appropriate status. For more information about the definition of available status icons, see IPAM Status Icons.