Submit a ticketCall us

Webinar: Web Help Desk for HR, Facilities and Accounting Departments
This webinar will focus on use cases for HR, Facilities and Accounting.

Having a unified ticketing and asset management system for all the departments in your company can provide end-users with a seamless experience and make things easier for your IT team. Yet, with different business tasks and objectives, many departments don’t fully understand the capabilities of Web Help Desk and how the software can be customized for effective use in their departments.
Register Now.

Home > Success Center > IP Address Manager (IPAM) > Add IP addresses when adding subnets through the spreadsheet import

Add IP addresses when adding subnets through the spreadsheet import

Table of contents
Created by Matthew Lamb, last modified by MindTouch on Jun 23, 2016

Views: 176 Votes: 1 Revisions: 4

Overview

By design, when subnets are added through the spreadsheet import, the subnet information will be created but the IP range of the subnet is not applied.

This articles shows you how to get around this and add the IP addresses manually.

Environment

IPAM 2 and later

Steps

Manually add the IP range

  1. Go to Manage Subnets & IP Addresses.
  2. Find and click the empty subnet.
  3. Click Add IP Range.
  4. Enter the Starting and Ending IP Address.
  5. Click Save.

 

Import the IP addresses through the spreadsheet

  1. You can create another spreadsheet and list all the IP addresses and relevant information, then import this over the existing subnets.
  2. Create a new spreadsheet and add all the Ip addresses and required information.
  3. Go to Manage Subnets & IP Addresses.
  4. Find and lick the empty subnet.
  5. Click Import > Import IP Address file.
  6. Proceed through the import spreadsheet wizard.
  7. Add the IP address spreadsheet that was created.
  8. Make sure that the section for "This file includes:" is set to the IP Addresses and is restricted to the subnet(s) that you require.

 

Import large quantities of IPs into multiple subnets

If you have empty subnets and/or the above methods are not possible, you can run the AddIp tool on IPAM. Please note that this must be run from the primary poller and any issues are not supported by SolarWinds.

 

Last modified
19:38, 22 Jun 2016

Tags

Classifications

Public