Submit a ticketCall us

AnnouncementsWeb Help Desk Integrations eCourse

Looking to reduce response times? Sign up for our eCourse to learn how integrating Web Help Desk with Dameware Remote Support, Network Configuration Manager, Network Performance Monitor, and Server & Application Monitor can improve communication efficiencies.

Register here.

Home > Success Center > Engineers ToolSet (ETS) > ETS - Knowledgebase Articles > Configure web Toolset to send alerts for high transfer rates on an interface

Configure web Toolset to send alerts for high transfer rates on an interface

Table of contents

Overview

This article describes how to configure Engineer's Toolset on the Web to monitor interfaces and send email alerts when high transfers occur.

Environment

  • All Engineer's Toolset versions
  • All Windows versions

Steps

  1. Open Network Performance Monitor.
  2. Click New and add the device IP.
  3. Click Next and enter the required SNMP String.
  4. Click Finish.
  5. On the Resources screen, click Select All Interfaces and click OKYou should now be monitoring all interfaces on that switch.
  6. Click Alerts > Configure Alerts > New Alert.
  7. On the General tab, assign a name to the new alert. SolarWinds recommends naming the alert High bandwidth.
  8. On the Property to Monitor tab, select Received Percent Utilization under the Interface Traffic section.
  9. On the Alert Trigger tab, set the desired thresholds to be alerted on.
  10. On the Actions tab, click Add Alert Action and add an Email Action with your email address.
  11. Click OK.
  12. Create the same alert for Transmit Percent Utilization.

 

 

Last modified

Tags

Classifications

Public