Submit a ticketCall us

ebook60.pngHow to be a Cisco® ASA ace

Our eBook, Thou Shalt Not Pass…I Think?! can help you overcome the challenges of monitoring and managing Cisco ASA firewalls. This eBook is a great read if you’ve been frustrated with monitoring firewalls, managing ACL configs, and troubleshooting VPN connections.

Get your free eBook.

Home > Success Center > Engineers ToolSet (ETS) > Engineer's Toolset Administrator Guide > Deprecated Tools > Deprecated router CPU load > Troubleshoot Router CPU load

Troubleshoot Router CPU load

Table of contents
No headers
Created by Aileen de Lara_ret, last modified by Aileen de Lara_ret on Jan 16, 2017

Views: 55 Votes: 0 Revisions: 2

If you get an error message such as

.... does not support the Cisco AvgBusy MIB or is not responding to SNMP polls, you probably need to reconfigure your router. Add the following lines to your Cisco router configuration file:

snmp-server community public RO

snmp-server community <YourCommunityString>RW

These lines enable SNMP on your router.

If SNMP is already configured on your router, look for a line in the configuration file similar to this:

snmp-server community public RO 60

The 60 at the end of this line is referring to an access list.

Do any of the following:

  • Add your Router CPU Load tool computer IP address to the access list.
  • Add your entire range of internal IP addresses.
  • Remove the access list entirely.

Confirm that there is no firewall between in your router that blocks SNMP.

 
Last modified

Tags

Classifications

Public