Submit a ticketCall us

ebook60.pngHow to be a Cisco® ASA ace

Our eBook, Thou Shalt Not Pass…I Think?! can help you overcome the challenges of monitoring and managing Cisco ASA firewalls. This eBook is a great read if you’ve been frustrated with monitoring firewalls, managing ACL configs, and troubleshooting VPN connections.

Get your free eBook.

Home > Success Center > Engineers ToolSet (ETS) > Engineer's Toolset Administrator Guide > List of tools included in Engineer's Toolset > IP address Management > Modify subnets

Modify subnets

Table of contents
No headers
Created by Aileen de Lara_ret, last modified by Aileen de Lara_ret on Jan 12, 2017

Views: 81 Votes: 0 Revisions: 2

You can change the name used to identify a subnet within the IP address Management tool, modify the subnet mask, and change the automatic scan frequency.

  1. In the left pane, click the subnet you want to modify.
  2. Click Subnets > Details.
  3. Enter an easily recognizable name in the Subnet Name field.
  4. Enter the mask you want to use when scanning the subnet.
    If you change this setting, you must rescan the subnet.
  5. Adjust the slider to adjust the frequency with which the IP address Management tool should scan the subnet for IP addresses in use.

You can also specify that this subnet be excluded from the automatic publishing of discovered IP addresses. See Automatically publish discovered information in HTML

Last modified