Submit a ticketCall us

ebook60.pngHow to be a Cisco® ASA ace

Our eBook, Thou Shalt Not Pass…I Think?! can help you overcome the challenges of monitoring and managing Cisco ASA firewalls. This eBook is a great read if you’ve been frustrated with monitoring firewalls, managing ACL configs, and troubleshooting VPN connections.

Get your free eBook.

Home > Success Center > Engineers ToolSet (ETS) > Engineer's Toolset Administrator Guide > List of tools included in Engineer's Toolset > IP address Management > Scan a subnet

Scan a subnet

Table of contents
No headers
Created by Aileen de Lara_ret, last modified by Aileen de Lara_ret on Jan 12, 2017

Views: 185 Votes: 0 Revisions: 2

You can get started quickly by scanning a network subnet.

  1. Click Subnets > New.
  2. Enter a name for the subnet.
    This name is used in the navigation tree on the left of the user interface, and as the window name in the right pane.
  3. Enter an IP address in the subnet you want to scan.
  4. Enter the subnet mask, and then click OK.

The following information is reported for each IP address:

  • IP address status, for example, Available, Used, or Reserved
  • DNS name
  • Days from the last response
  • Machine enter (For target devices that support SNMP)
  • System Name (For target devices that support SNMP)
  • Location (For target devices that support SNMP)
  • Response Time
  • Add comments for each address
  • You do not need to leave IP address Management running. Many customers run the tool only when assigning IP addresses. They scan the subnet to update the current IP address details just before they assign an IP address.
  • If you do leave the tool running, IP address Management has a better opportunity to report every used IP address. If you leave IP address Management running, any devices that were powered off during the initial scan are retrieved when the device is powered up.
 
Last modified

Tags

Classifications

Public