Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Engineer's ToolSet (ETS) > Configure web Toolset to send alerts for high transfer rates on an interface

Configure web Toolset to send alerts for high transfer rates on an interface

Table of contents

Overview

This article describes how to configure Engineer's Toolset on the Web to monitor interfaces and send email alerts when high transfers occur.

Environment

  • All Engineer's Toolset versions
  • All Windows versions

Steps

  1. Open Network Performance Monitor.
  2. Click New and add the device IP.
  3. Click Next and enter the required SNMP String.
  4. Click Finish.
  5. On the Resources screen, click Select All Interfaces and click OKYou should now be monitoring all interfaces on that switch.
  6. Click Alerts > Configure Alerts > New Alert.
  7. On the General tab, assign a name to the new alert. SolarWinds recommends naming the alert High bandwidth.
  8. On the Property to Monitor tab, select Received Percent Utilization under the Interface Traffic section.
  9. On the Alert Trigger tab, set the desired thresholds to be alerted on.
  10. On the Actions tab, click Add Alert Action and add an Email Action with your email address.
  11. Click OK.
  12. Create the same alert for Transmit Percent Utilization.

 

 

Last modified
15:20, 13 Nov 2015

Tags

Classifications

Public