Submit a ticketCall us

Bridging the ITSM Divide
Integrated help desk and remote support software for faster resolution

Join us on Wednesday, November 29, 2017 at 11 a.m. CT, as we discuss the benefits of effectively integrating your help desk software with remote support solutions to help increase the efficiency of IT administration, improve communication, and decrease mean time to resolution (MTTR) for IT issues of all sizes. This directly impacts end-user satisfaction and your business’ bottom line. Register Now.

Home > Success Center > Engineer's ToolSet (ETS) > Engineer's Toolset Administrator Guide > List of tools included in Engineer's Toolset > IP address Management > Filter subnet addresses

Filter subnet addresses

Created by Aileen de Lara_ret, last modified by Aileen de Lara_ret on Jan 12, 2017

Views: 7 Votes: 0 Revisions: 2

The addresses within each subnet can be filtered to display the following discovered addresses:

All addresses in the subnet Provides a list of all addresses listed in IP address order.
Used addresses in the subnet Provides a list of only the IP addresses that have responded to an IP address Management scan. These IP addresses are currently in use and should not be used when assigning addresses to new devices.
Available addresses in the subnet Displays IP addresses that have never responded and are marked available. These addresses can be assigned to new devices.
Reserved addresses in the subnet Displays the IP addresses that you have marked as reserved for future use. You should Reserve an IP address when assigning it to a device. You can reserve an IP address by clicking the IP address and pressing R on the keyboard or by clicking on the IP address and selecting Address Status > Reserved.

Filter discovered subnet list

Click View, and then select the filter you want to use.

  • All Addresses
  • Used Addresses
  • Reserved Addresses
  • Available Addresses
 
Last modified

Tags

Classifications

Public