Submit a ticketCall us

Webinar: Web Help Desk for HR, Facilities and Accounting Departments
This webinar will focus on use cases for HR, Facilities and Accounting.

Having a unified ticketing and asset management system for all the departments in your company can provide end-users with a seamless experience and make things easier for your IT team. Yet, with different business tasks and objectives, many departments don’t fully understand the capabilities of Web Help Desk and how the software can be customized for effective use in their departments.
Register Now.

Home > Success Center > Engineer's ToolSet (ETS) > Engineer's Toolset Administrator Guide > List of tools included in Engineer's Toolset > Bandwidth Gauges > Create gauge

Create gauge

Table of contents
No headers
Created by Aileen de Lara_ret, last modified by Aileen de Lara_ret on Jan 10, 2017

Views: 33 Votes: 0 Revisions: 2

Bandwidth Gauges are simple to set up. As long as you have enabled SNMP communication on your devices, and your devices support MIB-II, you can monitor bandwidth usage with the Bandwidth Gauges tool. The number of gauges is governed by the memory of the Toolset computer. Real time utilization is based on the number of octets transmitted or received through an interface over the last few seconds. Bandwidth gauge polls the remote interface about every fifteen (15) seconds by default and calculates average bits per second since the most recent poll. You can select any interface or sub-interface of a frame relay to monitor.

  1. Click Gauges > New Gauge.
  2. Specify the device IP address or host name.
  3. Select to use a community string or SNMPv3credentials.

    To test the credentials, click Test.

  4. Click Next.

    Specify if you want to store the credentials in the shared credentials database when prompted.

  5. Select discovered interfaces or ports, and then click Next.
  6. Check that Adjust automatically-discovered speed is correct, or specify your own speed.
    Different speeds can be specified for transmit and receive. The tool uses the port speeds to calculate percent utilization of the interface and define the upper scale of the gauge.
  7. Select 64-bit or 32-bit traffic counters.
  8. Click Finish.

    The gauge measures a baseline, and then immediately start monitoring usage.

 
Last modified
23:24, 9 Jan 2017

Tags

Classifications

Public