Submit a ticketCall us

whitepaperYour VM Perplexities Called, and They Need You to Read This.

Virtualization can give you enormous flexibility with future workloads and can be a key enabler for other areas, like cloud computing and disaster recovery. So, how can you get a handle on the performance challenges in your virtual environment and manage deployments without erasing the potential upside? Learn the four key areas you need to be focusing on to help deliver a healthy and well-performing data center.

Get your free white paper.

Home > Success Center > DameWare Remote Support & Mini Remote Control > DameWare Documentation > Dameware - Previous Versions > DameWare Remote Support User Guide > Remote system tasks and views > Intel AMT vPro setup in Dameware Remote Support

Intel AMT vPro setup in Dameware Remote Support

Table of contents
No headers
Created by Anthony.Rinaldi_ret, last modified by Tara Duval on Jan 30, 2019

Views: 4,690 Votes: 0 Revisions: 3

The Intel AMT > Power task in Remote Support allows users to connect to remote systems running on Intel vPro hardware that supports the AMT KVM feature. For this to work, enable the AMT KVM feature on your vPro hardware.

To configure Intel vPro hosts for AMT KVM connections:

  1. Reboot the host, and then enter its BIOS configuration menu.

  2. Under AMT Options, select the following options:

    • Firmware Verbosity

    • AMT Setup Prompt

  3. Reboot the host, and then enter the Management Engine BIOS Extension (MBEx): Just after the BIOS startup screen, press Ctrl+P.

  4. If you are prompted for a password, enter the default password, admin, and then create a new password.

  5. In the Intel ME Platform Configuration menu, select Activate Network Access.

  6. In the Intel ME Network Setup menu, select Intel ME Network Name Settings.

  7. Select Host Name, and then enter the hostname for the host.

  8. Press Esc to return to the previous menu.

  9. Select Manageability Feature Selection, and then ensure it is enabled in the lower pane.

  10. Select SOL/IDER.

  11. In the SOL/IDER menu, enable the following options:

    • SOL

    • IDER

    • Legacy Redirection Mode

  12. Return to the previous menu, and then select KVM Configuration.

  13. In the KVM Configuration menu, select KVM Feature Selection, and then ensure it is enabled in the lower pane.

  14. In the upper pane, select User Opt-in, and then select User Consent is required for KVM Session in the lower pane.

  15. In the upper pane, select Opt-in Configurable from remote IT, and then select Enable Remote Control of KVM Opt-In Policy in the lower pane.

  16. Press Esc until you are prompted to leave the MEBx menu.

Source: http://www.howtogeek.com/56538/

Last modified

Tags

Classifications

Public