Submit a ticketCall us

Webinar: Web Help Desk for HR, Facilities and Accounting Departments
This webinar will focus on use cases for HR, Facilities and Accounting.

Having a unified ticketing and asset management system for all the departments in your company can provide end-users with a seamless experience and make things easier for your IT team. Yet, with different business tasks and objectives, many departments don’t fully understand the capabilities of Web Help Desk and how the software can be customized for effective use in their departments.
Register Now.

Home > Success Center > DameWare Remote Support & Mini Remote Control > DameWare Documentation > DameWare Remote Support and Mini Remote Control Documentation - Previous Versions > DameWare Remote Support User Guide > Remote system tasks and views > Intel AMT vPro setup

Intel AMT vPro setup

Table of contents
No headers
Created by Anthony.Rinaldi_ret, last modified by Anthony.Rinaldi_ret on Jul 12, 2016

Views: 388 Votes: 0 Revisions: 2

The Intel AMT > Power task in Remote Support allows users to connect to remote systems running on Intel vPro hardware that supports the AMT KVM feature. For this to work, enable the AMT KVM feature on your vPro hardware.

To configure Intel vPro hosts for AMT KVM connections:

  1. Reboot the host, and then enter its BIOS configuration menu.

  2. Under AMT Options, select the following options:

    • Firmware Verbosity

    • AMT Setup Prompt

  3. Reboot the host, and then enter the Management Engine BIOS Extension (MBEx): Just after the BIOS startup screen, press Ctrl+P.

  4. If you are prompted for a password, enter the default password, admin, and then create a new password.

  5. In the Intel ME Platform Configuration menu, select Activate Network Access.

  6. In the Intel ME Network Setup menu, select Intel ME Network Name Settings.

  7. Select Host Name, and then enter the hostname for the host.

  8. Press Esc to return to the previous menu.

  9. Select Manageability Feature Selection, and then ensure it is enabled in the lower pane.

  10. Select SOL/IDER.

  11. In the SOL/IDER menu, enable the following options:

    • SOL

    • IDER

    • Legacy Redirection Mode

  12. Return to the previous menu, and then select KVM Configuration.

  13. In the KVM Configuration menu, select KVM Feature Selection, and then ensure it is enabled in the lower pane.

  14. In the upper pane, select User Opt-in, and then select User Consent is required for KVM Session in the lower pane.

  15. In the upper pane, select Opt-in Configurable from remote IT, and then select Enable Remote Control of KVM Opt-In Policy in the lower pane.

  16. Press Esc until you are prompted to leave the MEBx menu.

Source: http://www.howtogeek.com/56538/

Last modified
14:29, 12 Jul 2016

Tags

Classifications

Public